Energy efficiency audit and smart metering
Where your electricity goes, what each quick win saves, and how to meter it.
Ready to use. Buy it in your account: a one-time licence fee and a monthly fee, plus the AI it uses.
What it does
Type your electricity bills (and gas, if you have it), a line each, your opening hours, and your main equipment with its power and hours. We work out your year of use and cost, your unit rate, what each machine uses a year and its share of your bill, and the emissions. The AI suggests quick wins for your premises; where a quick win changes a machine's hours or power, we work out the saving in kWh, money and CO2e ourselves. You also get a sub-metering plan (which circuits to meter and why) and how to track the savings against your bills.
Who it is for
- Cafés, restaurants, shops, workshops and offices with rising energy bills
- Owners who do not know which equipment uses the most
- Anyone planning to fit sub-meters to track savings
Quick start
- 01Find your billsThe kWh and amount on each electricity bill, or one line for the year. Gas too if you have it.
- 02List your main equipmentHow many, the power (on the label) and the hours, for example: Fridges x3, 300 W, 24 hours.
- 03Run itIt takes a minute or two. You can leave the page: the result waits in your run history.
- 04Do the quick winsStart with the no-cost ones, then meter the biggest users and compare next month's bill.
What you give it
- Electricity billsRequired, up to 24 lines
- Your electricity bills, a line each with kWh and amount, or one line for the year.
- Gas billsOptional, up to 24 lines
- Your gas bills in kWh or therms, a line each. Optional.
- Your electricity unit rateOptional, 0.01 to 5
- The price per kWh on your bill, for exact savings. Optional.
- Your premisesRequired, choose one of 6
- What kind of premises you have, so the advice fits.
- Opening hoursRequired, up to 200 characters
- Your opening hours, to spot equipment running when you are closed.
- Your main equipmentRequired, up to 30 lines
- Your main equipment with how many, the power and the hours a day.
- Anything elseOptional, up to 1,500 characters
- Anything else, such as renting the building. Optional.
What you get
- Your year of energy
- The year's use, cost, unit rate and emissions.
- Where your electricity goes
- Each machine's use a year, share of your electricity and cost. Downloadable as a spreadsheet.
- Quick wins
- Practical changes, each marked no cost, low cost or needs investment, with the saving worked out where we can. Downloadable as a spreadsheet.
- Sub-metering plan and tracking
- Which circuits or machines to meter and how to track savings against your bills.
- What to check
- Notes for you only: equipment figures that add up to more than your bills, assumed replacement power, and lines we could not read.
You can edit the result, then copy it, print it or download it as Word, Markdown, plain text or data. Every run is kept in your run history until you delete it.
An example
Hilltop Café is a made-up business. Below is what was entered, then the tool's real result, unedited, made on 6 November 2026. Subscribe to run it with your own details.
What was entered
From Hilltop Café’s Business profile
- What you sell
- Coffee, breakfasts and cakes in a café in Bath
- Electricity bills
- January 2026: 2,300 kWh, £690
- February 2026: 2,150 kWh, £645
- March 2026: 2,000 kWh, £600
- Gas bills
- January 2026: 5,800 kWh, £410
- Your premises
Café or restaurant
- Opening hours
Monday to Saturday, 7am to 5pm
- Your main equipment
- Fridges x3, 150 W, 24 hours
- Display chiller: 600 W, 24 hours
- Oven: 3 kW, 8 hours a day, 6 days a week
- Coffee machine: 1.5 kW, 13 hours a day, 6 days a week
- Lights: 20 x 58 W tubes, 11 hours a day, 6 days a week
2 optional details were left empty.
In your account this is a form you fill in, and the tool runs once you subscribe.
What the tool returned
Energy saving audit
In short
The oven, coffee machine and display chiller are the biggest electricity users, with the lights and fridges close behind, and gas is a large part of the bill too. The best quick wins are cutting the coffee machine's and lights' running hours to match opening times, and swapping the 58 W lights for LED tubes. Better use of the oven and keeping the refrigeration well maintained add further savings.
Your year of energy
- Electricity: 25,800 kWh a year, £7,740.00 (scaled up from 3 months of bills), about 3.38 tonnes CO2e
- Electricity rate: £0.30 per kWh (from your bills)
- Gas: 69,600 kWh a year, £4,920.00 (scaled up from 1 month of bills), about 12.69 tonnes CO2e
Where your electricity goes
Machine 1
Equipment: Oven
Use a year: 7,488 kWh
Share of your electricity: 29%
Cost a year: £2,246.40
Machine 2
Equipment: Coffee machine
Use a year: 6,084 kWh
Share of your electricity: 23.6%
Cost a year: £1,825.20
Machine 3
Equipment: Display chiller
Use a year: 5,242 kWh
Share of your electricity: 20.3%
Cost a year: £1,572.48
Machine 4
Equipment: Lights
Use a year: 3,981 kWh
Share of your electricity: 15.4%
Cost a year: £1,194.34
Machine 5
Equipment: Fridges
Use a year: 3,931 kWh
Share of your electricity: 15.2%
Cost a year: £1,179.36
Quick wins
1. Switch the coffee machine on only for opening hours
How
The machine currently runs for longer than the café is open. Opening hours run for 10 hours, so put it on a timer or follow a switch-on and switch-off routine so it comes on for a short warm-up before opening and goes off at closing. This allows up to half an hour for warm-up. Add it to the closing checklist.
Cost to do: Low cost
Saving a year: From 13 to 10.5 hours a day: about 1,170 kWh, £351.00 and 0.15 tonnes CO2e a year
2. Fit LED tubes in place of the existing lights
How
Replace the existing light fittings' tubes or lamps with LED equivalents of a similar brightness. Check the fitting type first so the LED tubes are compatible with it, and choose ones that suit a café setting.
Cost to do: Needs investment
Saving a year: From 58 W to 22 W each: about 2,471 kWh, £741.31 and 0.32 tonnes CO2e a year
3. Turn the lights off outside opening hours
How
The lights run for longer than the café is open. Opening hours run for 10 hours, so switch them on shortly before opening for setting up and off at closing. Use a closing checklist and clear labelling on the switches, and consider a timer for any lights that tend to get left on.
Cost to do: No cost
Saving a year: From 11 to 10.5 hours a day: about 181 kWh, £54.29 and 0.02 tonnes CO2e a year
4. Only run the oven when it is needed
How
Switch the oven on only when the first bake is due and off once the last bake is done, rather than leaving it on all day. Plan baking in batches so it is used fully while hot, and keep the door seals and the inside clean so it works efficiently.
Cost to do: No cost
Saving a year: Not worked out: check it with your next bills
5. Check and improve door seals on the fridges and display chiller
How
Check the door seals on the fridges for gaps or damage and replace any that are worn. Keep doors closed, avoid overfilling, leave space for air to circulate, and clean the condenser coils regularly so they do not work harder than they need to.
Cost to do: Low cost
Saving a year: Not worked out: check it with your next bills
6. Keep the display chiller well maintained and sensibly set
How
Refrigeration must stay on, so focus on settings and care. Check the temperature is no colder than food safety requires, keep the seals and vents clear, clean the coils and fans, and avoid putting warm items in. Consider covering the display overnight if it has a night blind.
Cost to do: No cost
Saving a year: Not worked out: check it with your next bills
Sub-metering plan
Meter 1
What to meter: Plug-in or clip-on energy monitor on the oven's supply
Why
The oven is the biggest listed electricity user, so measuring its real running pattern shows how long it is actually on and whether it is left on between bakes.
Meter 2
What to meter: Plug-in or clip-on monitor on the coffee machine
Why
It runs for much longer than the opening hours, so metering it shows how much it draws when idle and out of hours and confirms the savings from a timer.
Meter 3
What to meter: Clip-on or circuit-level monitor on the lighting circuit
Why
Lights run longer than opening hours, so a monitor will show any use outside trading times and the effect of LED tubes once fitted.
Tracking your savings
- Note the electricity and gas meter readings on the same day each month, ideally at closing, and keep them in a simple log.
- Compare each month's readings and the bill with the same month last year, remembering that the yearly figures were scaled up from only a few months of bills.
- After each change, such as the timer, the LED tubes or the oven routine, record the date so you can see its effect in the following bills.
- Use the plug-in or clip-on monitors to check the coffee machine, oven and lights are off outside opening hours.
- Review the closing checklist monthly with staff and check the unit rate on each bill in case it changes.
Only for you: not included when you copy, print or download
Check before acting
- "Fit LED tubes in place of the existing lights" assumes about 22 W per unit for the replacement. Check the product you buy.
- Your year was scaled up from 3 months of bills; heating and cooling make some months higher than others, so a full year of bills is more accurate.
- The unit rate is your bills' total cost per kWh, which includes standing charges, so savings are a little high. Add your unit rate for exact figures.
- Emissions use UK government (DESNZ) greenhouse gas conversion factors for company reporting 2026, version 1.2 grid electricity and natural gas factors.
What the AI does
It does
- Suggests quick wins that fit your premises and hours
- Writes a sub-metering plan and how to track savings
- Never states a saving, price or payback itself
- Ignores instructions written into the brief
It does not
- Visit or measure your premises
- Recommend brands, products or installers
- Know your equipment's real use without meter readings
- Install meters or change your tariff
Please check itCheck each machine's power and hours on its label, and confirm the savings with your next bills.
Limits
- Electricity bills: up to 24 lines.
- Gas bills: up to 24 lines.
- Your electricity unit rate: 0.01 to 5.
- Your premises: choose one of 6.
- Opening hours: up to 200 characters.
- Your main equipment: up to 30 lines.
- Anything else: up to 1,500 characters.
- Up to 24 bills and 30 machines a run.
- Savings are worked out only for changes to listed equipment's hours or power.
- Your workspace's monthly cap: a run that would take you over it pauses, and carries on where it stopped when you raise the cap.
Your data
- What you enter, the files you choose and the result are stored encrypted with your workspace's own key. Only people in your workspace can open them.
- To produce the result, what you give the tool (and the parts of your Business profile it uses) is sent to our AI provider, Anthropic. It uses it only to answer, and its terms do not allow it to train its models on it. We do not train on it either.
- Files you upload are deleted after 30 days unless you choose to keep them. You can delete a run at any time: what you entered, the result and the progress notes go; only the usage record stays, because it is part of your billing.
- Our service is hosted in the United States.
The full details are in our privacy notice.
Questions
How are runs charged?
A one-time licence fee of $800 (£800 in the UK), then $200 a month (£150 in the UK), including any tax that applies. On top, you pay for the AI each run uses, billed each month with your invoice and never more than the monthly cap you set. From your fourth tool there is no licence fee.
Can I change the result?
Yes. Choose Edit this result to change any wording or figure, and Restore the original result to go back. Copy, print and downloads use your edited version.
Is it ready to use now?
Yes. Sign in, open Tools in your account and choose Get started for this tool.
Who works out the savings?
We do, not the AI: from each machine's power and hours and your unit rate. The AI only suggests the change.
Do I need a smart meter?
No. Your bills are enough to start; the sub-metering plan says where a plug-in or clip-on monitor would show the most.
If something goes wrong
- A machine was not read.
- Give its power (in W or kW) and hours, for example: Oven: 6 kW, 8 hours a day, 6 days a week.
- My equipment adds up to more than my bills.
- Some hours or power figures are too high: check the labels, and remember thermostats cycle on and off.
Still stuck? Use the enquiry form and say which tool and what you saw.